The CODELOCK CL100 series of standard duty mechanical pushbutton locks are the simplest, lowest cost, best quality mechanical locks you can buy. Easy to install on almost any door by a local locksmith or even by yourself. Perfect for locking up a closet at home or the garage door for after school keyless access by the kids. A basic set of features and functions are available to choose from to solve most applications. Each model comes in an attractive painted Silver Grey finish and features handy, easy to use vertical levers on the front and back of the lock. Stainless Steel and Polished Brass are available as optional finishes.

Fully mechanical - no batteries required
Easy to install, with all pieces and parts included
Suitable for interior and exterior use
Code can be changed quickly, whenever required
Over 8,000 codes to choose from
Available in painted Silver Grey finish with options for Stainless Steel and Polished Brass

Many Codes to choose from . . .

Each CODELOCK code chamber consists of from 11 to 13 keys from which the code is selected, and a 'C' button which is used to re-set the chamber after an incorrect entry, and which must always be used as the first digit of a code. Keys may only be used ONCE in a code. For example, 1212 is not possible. A CODELOCK code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or whatever sequence is most convenient to remember. With 13 buttons, a total of 8,191 different codes * are available, any of which can be entered in any sequence.

On the CODELOCKS Model CL100, CL200, CL300 Series, most people will set a code in the range of 4 to 7 digits (total number of codes in this range is 5434). The lock is factory set with a randomly selected 6 digit code starting with the 'C' button. The code is not recorded by the factory. The code can be changed as often as required to any other 6 digit code. Every new code must start with the C button. Using the spare tumblers, one red and one blue, the code length can be changed to 5 or 7 digits. Shorter codes are not recommended.

The CODELOCK CL200 has the following available features
Push button mechanical locks, ideal for restricting access for low usage doors i.e. stock cupboards, staff toilets, your office... the list goes on. Four standard functions to choose from to suit specific requirements.

Fully mechanical
Easy to fit, with all parts and fixings included
5 functions in 2 PVD finishes
Suitable for internal and external use
Code can be changed quickly, as required
Over 8,000 codes to choose from

200 Surface Deadbolt

Bolt slides on inside surface to lock or unlock. Bolt is moved manually by means of the outside knob after code input and freely by the inside knob at all times. A mortise keeper plate is provided. Hook bolt is an option for use on sliding doors.

210 Mortice Deadbolt

Lock size is the same as the CL250 diagram. Deadbolt extends 1” beyond door edge when locked by inside thumb turn.

250 Mortice Latch

Latch is spring loaded and will lock automatically when the door is closed. The latch bolt has a deadlocking plunger feature to prevent shimming of the latch.

255 Mortice Latch with Hold Open

Functionally the same as the 250 with the addition of a slide button which can be used to hold open the latchbolt when the lock is not required to be operational.

290 Mortice Latch Back to Back

The CL290 Mortise Latch comes with two code plates, installed Back to Back, to provide coded access in both directions.. Great for exterior gates or other special applications where building codes allow locked exit.

The CODELOCK CL300 series of standard duty mechanical pushbutton locks are ideal for restricting access for low usage doors such as storage closets, staff toilets, management offices, valuable inventory areas ... the list goes on. We offer multiple variations of features, finishes and functions to choose from to suit specific requirements. Each CL300 model comes with a round entry knob and vertical exit lever or thumb turn

Fully mechanical - no batteries required
Easy to install, with all pieces and parts included
Suitable for interior and exterior use
Code can be changed quickly, whenever required
Over 8,000 codes to choose from
Available in PVD Stainless Steel and Polished Brass, Dark Bronze (not all models) and optionally Silver Gray painted finish

CL310 Tubular Deadbolt
Use the CL310 as a primary lock on duct doors, store rooms, office doors, or as an auxiliary deadbolt lock on the front, side, garage, or rear door of a residence. Includes a dual backset deadbolt with hardened roll-pin for both 2 3/8" and 2 3/4" backsets. Includes metallic cover plates required when replacing an existing cylindrical knobset lock (covers 2 1/8" hole).
Available in PVD Stainless Steel and Polished Brass, Dark Bronze, and optionally in Silver Gray painted finishes

CL350 Tubular Deadlatch
The CL350 includes a dual backset deadlatch that always locks when the door is closed. Convenient vertical lever handle on the back-plate. Includes a dual backset latch bolt for both 2 3/8" and 2 3/4" backsets. Includes metallic cover plates required when replacing an existing cylindrical knobset lock (covers 2 1/8" hole).
Available in PVD Stainless Steel and Polished Brass, Dark Bronze, and optionally in Silver Gray painted finishes

KEY Bypass
Any of the above locks can be supplied with a key bypass option. This allows the code to be bypassed and the lock opened with a key (includes 2 keys with Schlage C keyway). Order Models: CL300K, CL310K, CL350K.

TheCODELOCK CL400 series is a medium duty mechanical combination lock with full size lever handles. The lever handles allow it to be used where the knob operated push button lock is unsuitable.

The functions available allow for control of the door in various ways for office, educational, local authority or other medium duty commercial and residential applications

Medium duty Codelock
PVD, weather resistant, low maintenance finish
Full size lever handles
Outside lever has a slipping clutch to avoid damage to the mechanism if forced
Easy code change as often as required
Code free option available on both Profile Mortise Lock and Mortise Latchbolt functions

CL410/CL415 Including Mortise Latchbolt

The outside lever handle will retract the latch when the correct code is entered.

The CL410/CL415 is supplied complete with a tubular spring loaded latchbolt which will lock automatically when the door is closed. The CL415 includes the code-free passage mode button option.

Outside lever handle will retract the latch after a correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed. Key retracts latchbolt for entry without using a code. Key controls deadbolt position. When deadbolt is projected it denies access by code. When deadbolt is projected the safety feature allows the inside lever handle to retract the deadbolt and the latchbolt, preventing people being accidentally locked in.

The 425 features a Code Free Access function on the keypad. In code free mode the outside lever will retract the latchbolt without using a code.

The NewCODELOCK CL460 narrow stile lock is a medium duty mechanical codelock suitable for on narrow stile aluminum doors such as store fronts. The lock is ideal for new or retrofit applications.

Designed to be installed with Adams Rite latchbolts (deadbolt version pending) or similar style mortise locks.

*Non Handed - suitable for left or right hand hung doors, makes ordering/fitting very simple
Full size lever handles standard, ball shape knobs available
Easy installation
PVD stainless steel finish
Includes cams and fixing tabs
*Includes 1 ?” mortise cylinder with fully threaded body. Contact
codelocks for alternate keyways and IC cylinders

Narrow Stile Lock - CL460

A narrow stile lock with a threaded mortice cylinder for key override

The Codelock 500 series push button lock is a heavy duty mechanically coded lock with full size lever handles for use in high traffic situations. The lever handles allow it to be used as the primary lock on most doors, while the functions provide for control of the door in various ways.

*Heavy duty push button lock
PVD, weather resistant, low maintenance finish
Full size lever handles
Outside lever has a slipping clutch to avoid damage to the mechanism if forced
Easy code change as often as required
Code free option available on both Mortice Lock and Mortice Latch functions
*Back to Back
Any of the code locks below may be ordered with two keypad plates for mounting on each side of the door to provide coded access in both directions.

CL510/515 Including Mortice Latch

Outside lever handle will retract the latch when the correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed.

The 515 features a Code Free Access option on the keypad. In code free mode the outside lever will retract the latchbolt without using a code.

520/525 Mortice Lock

Outside lever handle will retract the latch after a correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed. Key retracts latchbolt for entry without using a code. Key controls deadbolt position. When deadbolt is projected it denies access by code. When deadbolt is projected the safety feature allows the inside lever handle to retract the deadbolt and the latchbolt, preventing people being accidentally locked in.

The 525 features a Code Free Access function on the keypad. In code free mode the outside lever will retract the latchbolt without using a code.

500/505 Keypad Plates Only Panic Kit

Coded front plate only with extra long spindle to work with most single point panic pads or bars (not supplied)

The New Codelock 1000 Cabinet Lock opens up the possibilities for many more uses of electronic access control. This simple electronic lock is an easy and quick retrofit for cam locks supplied as standard on a wide range of lockers, cabinets and cupboards. It can easily be fitted to lockers or cabinets, which don’t have a locking device already installed, giving the user immediate and simple keypad access without the need for keys

The CODELOCK CL1000 has the following available features:
Fit in schools, hospitals, care homes, nursery's, offices, workplace, and more
Simple 5 button keypad
All codes are 4 digits long
Battery power, 2 AAA cells
All parts/fixing/templates included
Operating Instructions included
Silver Grey finish

hospital

care home

home

office

school

nursery

workplace

wareho

Cabinet Lock - 1005

5 Key Electronic Cabinet Cam Lock in Silver Grey Painted Finish with Two Cams, with One 4 Digit Master Code, One 4 Digit Sub-Master Code, and One 4 Digit User Code, User Code can be Repeat-Use or Single-Use (Locker Mode), Over 15,000 Operations on 2 AAA 2850mAh Batteries, 9V Battery External Jump Start. Fits doors 1/2” thick or less (5/8” threaded barrel

The Codelock CL2010 is a medium duty electronic knobset intended for light commercial and residential installation. It is designed to replace any standard knobset using the same door preparation. Several additional holes are required for battery cable and top through bolt to hold the lock to the door. Unique hex knob design sets this lock apart form the CL4000 Series. Includes a 5-Pin C Keyway non changeable cylinder.

The CL2010 Codelock keyless electronic lock represents a major step forward in low maintenance entry control. Based on Piezo technology, these products offer an exceptional battery life of 500,000 operations from the 4x1.5v AA cells@2900mAh. The CL2000 Series carries Codelocks lifetime warranty against defects in materials or manufacturing.

*The CODELOCK CL2000 has the following available features:
New Piezo Technology
Over 500,000 operations from 4xAA cells
PVD, weather resistant, low maintenance finish
Connections for remote release by reception desk button
Connections for release by alarm system
Code free entry mechanically by key or electronically from keypad
Allows up to 90 user codes 4, 5 or 6 digits long
Allows 1 Single-Use code
Tamper alarm and low battery warning

The outside knob turns freely until a valid code is entered and the blue LED is on, then the knob will retract the latchbolt. When the door closes the spring loaded latchbolt will automatically lock the door. The key may be used to momentarily unlock the door or to set the lock into Code Free passage mode so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the Master Code.

CL4000 is a medium duty electronic keyless lock offering all the functions of the CL2000, but with the benefit of full size lever handles which allow it to be used as the primary lock on doors where a knob operated lock would not be suitable.

The CODELOCK CL4000 has the following available features:
New Piezo Technology
Over 500,000 operations from 4xAA cells
PVD, weather resistant, low maintenance finish
Connections for remote release by reception desk button
Connections for release by alarm system
Code free entry mechanically by key or electronically from keypad
Allows up to 90 user codes 4, 5 or 6 digits long
Allows 1 Single-Use code
Tamper alarm and low battery warning

CL4010 Tubular Mortise Latch

Outside lever turns freely without operating the latchbolt. When valid code is entered and blue LED is illuminated, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door. The key will open the door for management functions. The key may be used to set the lock into Code Free mode so that anyone can open the door without using a code. Code Free mode can be programmed at the keypad using the Master Code.

This is a heavy duty keyless digital lock with full size lever handles, allowing use as the primary lock on most doors, particularly in high traffic situations.

The 5000 model is a stylish, contemporary design, ideal for a wide range of heavy duty entry control applications.

The Piezo actuator, used for the first time in a stand alone electronic lock provides a battery life of over 500,000 operations (approximately ten times more than a typical electronic push button lock).

*The CODELOCK CL5000 has the following available features:
A simple and cost effective access solution.
500,000 Operations from 4 x AA cells, batteries included.
Easy installation and programming
90 different user codes
1 Single-Use code
Reliable - Solid state Piezo technology, with low component count
Durable - Tested to over 1,000,000 cycles @ 2.4 Nm
Weather resistant Physical Vapour Deposition finish
Remote push button and Emergency Alarm release connections

CL5010 Tubular Mortice Latch

Outside lever turns freely without operating the latchbolt. When valid code is entered and blue light burns, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door. The key will open the door for management functions. The key may be used to set the lock into Code Free mode so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the Master Code.

CL5020 Mortice Lock

Outside lever and key functions as CL5010. Uses an ANSI style full mortise chassis with deadlocking latchbolt for long lasting use on heavy duty doors

electronic bolt locks

Outside lever turns freely without operating the boltlocks. When valid code is entered and blue light burns, the lever will retract the bolt. When the door closes you will push lock buttom the locks automatically lock the door. The key will open the door for management functions. The key may be used to set the lock into remote kit so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the Master Code.